Quantity Takeoff Services
Takeoff Services
All Trades.
Professional quantity takeoff services for every trade — drywall, electrical, framing, concrete, plumbing, HVAC, roofing, masonry, sitework, painting, flooring, and more. Delivered in Excel with annotated markups in 48–72 hours.
All CSI divisions · All trades · 48–72 hour standard turnaround · All 50 states
Standard Turnaround
Takeoff Categories
CSI Divisions Covered
Drawing-Referenced
What We Quantify
Takeoff Services by Trade
Drywall, electrical, framing, concrete, plumbing, HVAC, roofing, masonry, sitework, and every other trade — all CSI divisions covered with drawing-referenced quantities and annotated markups.
Material Quantity Takeoffs
Precise material quantification for every element of your project — from concrete and steel to finishes and fixtures. Every unit of measure verified against the drawings with annotated backup.
- Concrete Volumes & Formwork Areas
- Structural Steel Tonnage & Member Counts
- Masonry Unit Counts (CMU, Brick, Stone)
- Lumber & Wood Framing Board Footage
- Roofing & Waterproofing Areas
- Insulation Areas & Thicknesses
- Flooring Areas by Material Type
- Ceiling Areas & Tile Counts
- Door, Window & Hardware Schedules
- Fixture & Equipment Counts
- Specialty Items & Allowances
- Procurement-Ready Quantity Lists
MEP Quantity Takeoffs
Detailed mechanical, electrical, and plumbing takeoffs covering every system — conduit runs, pipe lengths, duct areas, equipment, and all associated accessories and supports.
- Electrical Conduit & Wire Lengths by Type
- Panel Schedules & Circuit Counts
- Lighting Fixture Counts & Types
- Switchgear & Distribution Equipment
- Low Voltage & Data/Telecom Systems
- Ductwork Areas by Type & Gauge
- HVAC Equipment & Accessories
- Pipe Lengths by Size, Material & System
- Plumbing Fixture Counts & Rough-In
- Fire Sprinkler Head Counts & Pipe
- Controls & Building Automation
- EV Charging & Specialty Electrical
Civil & Sitework Takeoffs
Earthwork volumes, utility lengths, paving areas, and site improvement quantities — all calculated from civil drawings with cut/fill analysis, mass haul reporting, and import/export calculations.
- Earthwork Cut & Fill Volumes
- Mass Haul Analysis & Haul Distances
- Import / Export Material Quantities
- Subgrade Preparation Areas
- Underground Utility Pipe Lengths & Structures
- Paving Areas by Type & Thickness
- Curb, Gutter & Sidewalk Linear Footage
- Retaining Wall Areas & Volumes
- Landscaping, Seeding & Irrigation
- Erosion Control & Silt Fence
- Site Lighting, Signage & Striping
- Demolition & Clearing Areas
Structural Takeoffs
Complete structural quantity surveys for concrete, steel, and wood framing systems — including foundations, slabs, columns, beams, walls, and all connection hardware and embeds.
- Foundation Concrete Volumes & Rebar Weights
- Slab-on-Grade & Elevated Slab Areas
- Structural Steel Members by Size & Weight
- Steel Connections & Bolts
- Metal Deck Areas by Type & Gauge
- Precast Concrete Panel Counts & Areas
- Post-Tension Tendon Lengths & Quantities
- Miscellaneous Metals & Embeds
- Anchor Bolts & Base Plates
- Wood Framing Lumber & Engineered Wood
- Shear Walls & Lateral Systems
- Structural Openings & Penetrations
Architectural Takeoffs
Interior and exterior architectural quantity surveys covering all finish materials, assemblies, and specialty items — organized by room, floor, building area, and CSI division.
- Exterior Cladding, EIFS & Curtainwall Areas
- Storefront & Window Areas by Type
- Interior Partition Linear Footage & Areas
- Ceiling Systems by Type & Area
- Millwork & Casework Linear Footage
- Countertop Areas & Edge Lengths
- Tile & Stone Areas by Room & Type
- Carpet, VCT, LVT & Specialty Flooring
- Painting Areas by Surface Type
- Specialty Wall Finishes & Wallcoverings
- Toilet Accessories & Specialty Equipment
- Signage & Wayfinding Counts
Roofing & Waterproofing Takeoffs
Detailed roofing and waterproofing quantity surveys covering all membrane types, insulation, flashings, drains, and accessories — organized by roof area and system type.
- Roof Area by System Type (TPO, EPDM, Metal)
- Insulation Areas & R-Value Specifications
- Flashing Linear Footage by Type
- Roof Drain & Scupper Counts
- Parapet Wall Coping Areas
- Roof Penetration Counts & Sizes
- Below-Grade Waterproofing Areas
- Plaza Deck & Podium Waterproofing
- Green Roof Assembly Areas
- Skylight & Roof Access Hatch Counts
- Roof Accessories & Equipment Curbs
- Warranty Documentation Support
Concrete & Masonry Takeoffs
Comprehensive concrete and masonry quantity surveys — from foundations and slabs through walls, columns, and all associated reinforcing, formwork, and accessories.
- Footing & Foundation Concrete Volumes
- Wall Concrete Volumes & Formwork Areas
- Column & Beam Concrete Volumes
- Slab Concrete Volumes & Finish Areas
- Rebar Weights by Size & Grade
- Welded Wire Reinforcement Areas
- Concrete Block (CMU) Unit Counts
- Brick Quantities by Bond Pattern
- Mortar & Grout Volumes
- Masonry Reinforcing & Lintels
- Concrete Accessories & Inserts
- Precast & Tilt-Up Panel Areas
Full CSI Division Takeoffs
Comprehensive quantity surveys covering all 50 CSI MasterFormat divisions — from Division 01 General Requirements through Division 49 — for complete, gap-free project coverage.
- All 50 CSI MasterFormat Divisions
- Division-by-Division Reporting
- Cross-Referenced to Drawing Sheet Numbers
- Organized by Trade & Subcontractor Package
- Revision Tracking & Addenda Updates
- Scope Gap & Missing Information Reports
- Alternate & Allowance Tracking
- Excel & PDF Deliverables
Trade Coverage
Every Trade. Every Unit of Measure.
We cover all 18 major construction trades in-house — no outsourcing, no gaps. Every quantity is verified against the drawings.
Concrete & Formwork
CY volumes, SF formwork, LF edge forms, rebar weights
Structural Steel
Tonnage by member type, connection counts, anchor bolts
Masonry
CMU counts, brick quantities, mortar volumes, lintels
Carpentry & Framing
BF lumber, LF framing, SF sheathing, hardware counts
Roofing
SF by system, LF flashing, drain counts, insulation SF
Waterproofing
SF membrane, LF termination, drain counts, protection board
Doors & Windows
Unit counts, SF glazing, hardware schedules, frame types
Drywall & Framing
SF board, LF framing, SF tape & finish, SF ceiling
Tile & Stone
SF by room & type, LF trim, SF setting bed
Flooring
SF by material, LF base, SF underlayment, transition strips
Painting
SF by surface type, LF trim, door counts, coat specifications
Electrical
LF conduit by type, wire LF, device counts, panel schedules
Mechanical / HVAC
SF ductwork, LF pipe, equipment counts, diffuser counts
Plumbing
LF pipe by size, fixture counts, rough-in counts, equipment
Fire Protection
Head counts, LF pipe by size, equipment, hose cabinet counts
Civil / Sitework
CY earthwork, LF utilities, SF paving, LF curb & gutter
Landscaping
SF seeding, plant counts, LF irrigation, SF mulch
Elevators
Unit counts, shaft dimensions, pit depths, machine room
What You Receive
Takeoff Deliverables
Every takeoff package includes multiple deliverable formats — so your estimators, PMs, and procurement team all have what they need.
Excel Quantity Workbooks
Organized by CSI division, trade, and drawing sheet. All formulas intact, quantities cross-referenced to sheet numbers, and subtotals by area or building section.
Annotated PDF Drawings
Color-coded markup overlays showing exactly what was counted, measured, or calculated — every item traceable back to the drawing.
PDF Summary Reports
Executive-level quantity summaries with totals, units of measure, and scope notes — formatted for quick review by estimators, PMs, and owners.
Scope Gap Reports
Identification of missing information, drawing conflicts, specification gaps, and items requiring clarification before bidding.
Procurement Lists
Formatted material lists organized by supplier category — ready to send to vendors and subcontractors for quote requests.
Revision Tracking
When drawings are revised or addenda issued, we update quantities and provide a clear delta report showing what changed and by how much.
Turnaround Times
Fast, Reliable Delivery
Standard turnaround is 48–72 hours for most projects. Rush delivery available. Pricing is based on project size, trade count, and drawing complexity.
Small Projects
Under 5,000 SF
Single trade or single discipline
Medium Projects
5,000–50,000 SF
Multi-trade or full building
Large Projects
50,000–200,000 SF
Full CSI coverage
Major Projects
200,000+ SF
Complex / phased projects
Rush Delivery Available
Need it in 24 hours or less? Contact us with your deadline and we will confirm availability.
Technology
Takeoff Software We Use
PlanSwift
Bluebeam Revu
On-Screen Takeoff (OST)
Autodesk Revit (BIM)
AutoCAD
Trimble Estimation
Procore
Advanced Excel
PDF Takeoff Tools
SketchUp
Navisworks
Sage Estimating
FAQ
Frequently Asked Questions
Do you provide drywall takeoff services?
Yes. Our drywall takeoffs include metal stud framing, drywall board counts by type and thickness, taping, finishing, insulation, and all accessories — delivered in Excel with annotated markups. Turnaround is 48–72 hours.
Can you do electrical quantity takeoffs?
Absolutely. Our electrical takeoffs cover conduit by type and size, wire lengths, panel schedules, fixture counts, switchgear, low voltage systems, EV charging, and all associated hardware — for commercial, industrial, and residential projects.
Do you provide concrete estimating and takeoffs?
Yes. We quantify foundations, slabs-on-grade, elevated slabs, walls, columns, beams, rebar by size and weight, formwork areas, and all concrete accessories — with pour schedules and material lists.
Can you do framing takeoffs for wood and metal stud?
Yes. We cover wood framing (studs, plates, headers, sheathing, blocking) and metal stud framing (track, stud, bridging, clips) — for residential and commercial projects of any size.
Do you offer plumbing and HVAC takeoffs?
Yes. Plumbing takeoffs include pipe lengths by size and material, fixture counts, rough-in, water heaters, and accessories. HVAC takeoffs cover ductwork areas by type and gauge, equipment, diffusers, controls, and all mechanical accessories.
What file formats do you accept?
We accept PDF, CAD (DWG/DXF), Revit (RVT), SketchUp, and most other common formats. We can also work from printed drawings if needed — just let us know.
Do you provide takeoffs for just one trade or the full project?
Both. We can provide a single-trade takeoff (e.g., drywall only, electrical only) or a complete multi-trade takeoff covering all CSI divisions. Just tell us what you need.
What is your turnaround time for a rush takeoff?
Rush delivery (24 hours or less) is available for an additional fee. Contact us with your deadline and we will confirm availability before you submit.
Trade Specialties
Takeoffs by Trade
Need a takeoff for a specific trade? Each page below covers exactly what's included, turnaround times, and FAQs for that trade.
Related Services
Explore More Services
Ready to Get Your Takeoff?
Upload your drawings and receive a complete, trade-by-trade quantity takeoff in 48 to 72 hours — annotated, drawing-referenced, and ready to bid.